A fully equipped welding truck comes to your South Austin property — gate frames, perimeter hardware, railings, and custom metalwork repaired on-site with MIG, TIG, and stick welding. No removal, no shop transport. Same-day service and free on-site estimates.
Mobile welding in South Central Austin typically costs $150–$800 depending on scope, with most gate and metal hardware repairs completed in 1–4 hours on-site. Austin Estate Gate brings a fully equipped welding truck to Travis Heights, Bouldin Creek, Barton Hills, Zilker, Circle C, and all South Austin neighborhoods — MIG, TIG, and stick welding on steel, iron, aluminum, and stainless steel — eliminating the cost and downtime of removing heavy structures for shop transport.
Your 30-year-old wrought iron perimeter section in Travis Heights has a section rusting through at the base, and the masonry on either side makes it impossible to remove without tearing up the stone wall. The previous contractor wants to cut out the whole panel. We weld and reinforce it in place — no masonry damage, no panel removal, done in two hours. Call (512) 296-2671.
South Central Austin's established neighborhoods have iron and steel gates, perimeter hardware, and railings that have weathered decades of Central Texas heat and humidity. Many of these need structural repair that can only be done on-site:
We handle gate welding, perimeter hardware welding, and custom metal fabrication — all on-site at your South Central Austin property.
Repairing bent, cracked, or broken gate frames (see our gate repair services), re-welding hinges and mounting brackets, reinforcing gate posts affected by soil movement or root activity, vehicle impact damage repair, adding automation mounts to manual gates, and custom modifications for property renovations.
Repairing sections of iron or steel perimeter hardware, re-attaching panels to posts, reinforcing corners and connections, and replacing corroded or damaged sections to match the existing design.
Brackets, mounts, and hardware fabricated on-site, handrails and railings, decorative metalwork, security bars and window guards, and property address numbers and signage mounts.
Most mobile welding jobs in South Central Austin run $150–$800, depending on the scope and materials. A single hinge re-weld or bracket repair sits at the low end; reinforcing a full perimeter section or fabricating custom metalwork lands higher.
We give you the price up front after seeing photos — no surprise charges. Every job starts with a free on-site estimate, so you know the cost before any work begins.
You describe the problem, we give you an estimate, then a fully equipped welding truck comes to your property and does the work on-site — typically in one visit.
Our truck is equipped for MIG, TIG, and stick welding on steel, iron, aluminum, and stainless steel. Need on-site welding in South Austin? Call (512) 296-2671 or use the form above to schedule a mobile welding visit.
We bring the truck to you. Same-day in most cases, and the on-site estimate is always free.
We cover all of South Central Austin's established neighborhoods and growing commercial districts, on-site at your property.
We also handle gate repair in South Central Austin across these same neighborhoods, plus the full Austin metro and Hill Country.
Our mobile welding service area across South Central Austin, TX.
Most mobile welding jobs in South Central Austin run $150–$800, depending on the scope and materials. A single hinge re-weld or bracket repair sits at the low end; reinforcing a full perimeter section or fabricating custom metalwork lands higher. We give you the price up front after seeing photos — no surprise charges.
We weld on-site. Our truck is equipped for MIG, TIG, and stick welding on steel, iron, aluminum, and stainless steel, so we repair gates, perimeter hardware, and railings right where they stand. That matters most when masonry or landscaping makes removal impossible — like an old Travis Heights wrought iron section set into a stone wall.
Most jobs are completed same-day once scheduled, and the welding itself typically takes 1–4 hours on-site. Send a description and photos of the damage and we'll schedule a visit and give you an estimate before we arrive.
Steel, iron, aluminum, and stainless steel — using MIG, TIG, and stick welding depending on the metal and the repair. That covers everything from a cracked steel gate frame to a corroded wrought iron perimeter panel to an aluminum railing.
Yes. Vehicle impact to gates and bollards is common along the South Lamar and South Congress corridors. We straighten, re-weld, and reinforce the frame on-site and get the gate back in service the same day, so your property isn't left open.
In most cases we weld and reinforce it in place — no need to cut out and replace the whole panel. That avoids tearing up adjacent masonry and landscaping, and it's faster and far less expensive than a full replacement. For more on what's repairable on-site, see our mobile welding services and the blog on mobile welding vs. gate repair.
Same-day in most cases across Austin and the Hill Country.
"I had a really great experience with estate gates. They helped me out on a Sunday when my gate would not open — they even let me keep the key. Then they came back and fixed the gate and have always been super accommodating and professional, along with reasonably priced."
"Charles and Mars did excellent work here at Another Closet in Fredericksburg TX. Above and beyond — got my gate working better than before it was broken. Recommend these two 10 out of 10."
"I have worked with Anthony at my properties for years. He has always been flexible and easy to work with. I find him to be trustworthy, dependable, and always delivers on what he says he will do. When I need service he is there within 24 hrs and always honors warranties."
"We had them install a driveway gate at our home — they showed up every day on time, had professional installers who took their time, a salesperson who gave us 5 different options, then did the work on time, on budget. When my own ignorance required help, they showed up the same day, fixed my issue, educated me with patience and professionalism. Highly recommend this team."
"Our gate stopped working during the cold snap. I didn't catch the name of the person who answered the phone — the day before Christmas Eve, no less — but he was super helpful and talked my husband through how we could get the gate open to make it through the long holiday weekend. Thank you for taking the time to help us."
Bent gate, rusted-through perimeter section, or vehicle-impact damage? We'll come to you — same-day when we can, and the on-site estimate is always free. Call (512) 296-2671 or send us a photo to get started.