Want a driveway gate that opens on its own? We build or hang the gate, set the posts, mount the operator, run power or solar to it, and hook up the keypad, remote, or callbox, for homes, ranches, and commercial lots across Austin and the Texas Hill Country. Most residential installs take 1 to 2 days on site once the gate is built. A single automatic gate up to 12 ft starts around $10,000 installed, and every job starts with a free on-site estimate.

Automatic gate, electric gate, motorized gate: homeowners and installers use all three for the same thing, a gate with an operator (the motor) that opens it from a remote, keypad, phone, or callbox. Austin Estate Gate has installed them across Austin and the Hill Country since 2008.
The calls we get split two ways. No gate yet, or a gate you want replaced: that is this page, a full installation of the gate, posts, operator, power, and access control. A gate you already like that just needs to open itself: that is an opener added to the gate you have, covered on our gate opener installation and repair page and in Question 05 below.
Either way it is one crew, a free on-site estimate, and an itemized proposal before any work starts.
Most new automatic gates come down to three choices: swing or slide, wired or solar, and what you open it with. Find your driveway in the left column and that is where the estimate starts. If you already have a gate you like, you may only need an opener, which is typically 30 to 50 percent less than a full installation.
| If your driveway or gate is like this | Start here |
|---|---|
| Level drive with room for the gate to swing open | Swing gate, single or dual |
| A slope, a gravel drive, or no room for a swing | Slide gate, V-track or cantilever |
| You already have a sound gate and want it to open itself | Opener on your existing gate |
| No power near the gate, or a long drive from the house | Solar gate opener |
| You want a keypad, call box, or phone entry with it | Callbox and access control |
| You want the gate designed to match the house: iron, steel, wood fascia | Custom driveway gates |
| Your automatic gate is broken and you are not sure it is worth saving | Gate repair first |
Not sure which row you are in? The free site visit sorts it out. Before you call, it helps to know how wide the opening is, whether there is power at the gate, and whether you want a keypad or call box with it. If your current gate will not close or keeps reopening, read why an automatic gate won't close before you decide it needs replacing.
A single automatic gate up to 12 ft starts around $10,000 installed, or around $20,000 turnkey with an opener and a video call box. A dual gate for openings 13 ft and up starts around $15,000, about $27,500 turnkey, and a turnkey sliding gate 16 ft and up starts around $25,000. Every job starts with a free on-site estimate and an itemized proposal before any work begins.
| Single gate up to 12 ft | From about $10,000 |
| Turnkey: gate, opener and video call box | From about $20,000 |
| Dual gate, openings 13 ft and up | From about $15,000 |
| Turnkey dual gate | From about $27,500 |
| Turnkey sliding gate, 16 ft and up | From about $25,000 |
| Basic gate opener with remotes | About $5,000 |
| Basic dual gate opener equipment | About $7,500 |
| Solar power package | $500 to $2,000 |
| Keypad or basic access control | $300 to $2,500 |
| Cellular call box with live streaming video | About $5,000 |
Starting points, not a quote. Our guide to what a driveway gate costs in Austin walks through every line, including what trenching and Hill Country rock add to the job.
A complete automatic gate installation covers the gate itself, the operator (motor), the power system, and any access control devices. The process typically includes a site survey, design consultation, custom fabrication, concrete work for posts and footings, operator mounting, wiring, and programming. Already have a gate and only need the motor side? See our gate opener installers and repair page.
Planning a new gate? Send a few details for an estimate range.
At Austin Estate Gate, every installation starts with an on-site consultation. We evaluate your driveway layout, terrain, power availability, and security needs before recommending a system.
Looking to add a keypad, callbox, or intercom? See our callbox & access control service, or explore fully custom driveway gates for design options.
There are two main categories of automatic gates: swing gates and slide gates. The right choice depends on your driveway layout, terrain, and available space.
Swing gates open inward or outward on hinges, similar to a door. They require clearance space in the swing arc and work best on flat or gently sloped driveways.
Slide gates move horizontally along a track or rail. They require space along the fence line but no swing clearance, making them ideal for sloped or narrow driveways.
A dual swing gate splits the weight into two lighter leaves. A slide gate carries its weight on the track instead of on the hinge post, and it needs no swing room, which is why it suits sloped and tight driveways. One leaf means one operator and fewer parts to keep adjusted; two leaves means two of everything.
Before you call, it helps to know three things: swing or slide, how wide the opening is, and whether there is power at the gate. Not sure yet? The free site visit sorts that out.
The installation process follows a consistent sequence, though timelines vary by project complexity.
Three things are easier to settle now than after the concrete sets.
We answer the phone, come out to your property, and give you an itemized proposal before any work begins.
We recommend operators based on gate weight, duty cycle, and your specific usage patterns.
Yes. If you have a manual gate in good structural condition, we can retrofit it with an automatic operator. This includes mounting the motor, wiring, adding safety sensors, and installing remote controls or keypads. Retrofitting is typically 30-50% less expensive than a full new installation.
A gate opener (also called a gate operator) is the motor that powers your gate, and the access control device is how you open it, keypad, remote, callbox, intercom, or smartphone. Austin Estate Gate installs and pairs both as one system, sized to your gate's weight and how often it runs.
We size every operator to your gate's weight, length, and daily cycle count so the motor isn't overworked. A light residential swing gate and a heavy commercial slide gate need different operators, we recommend the right one rather than the most expensive one.
We install and service LiftMaster, DoorKing (DKS), Viking Access, US Automatic, Ramset, Apollo/FAAC, Nice/HySecurity, and Linear operators. If you already have one of these, we can repair, reprogram, or upgrade it. Our gate opener repair and replacement page covers the motor side. For repairs to an existing system, see our gate repair service, or read about the 7 most common automatic gate problems and how to fix them.
Yes. Solar-powered gate openers are an excellent option for properties without electrical service at the gate location. Central Texas averages over 230 sunny days per year, making solar a reliable power source.
Solar is popular for ranch properties, rural driveways, and any location where trenching electrical lines would be costly. Our guide to solar gate openers in the Hill Country walks through solar versus a wired line, and how to keep a solar gate running through the winter.
Yes. Austin Estate Gate provides automatic gate installation across Austin, West Lake Hills, Lakeway, Dripping Springs, Spicewood, Bee Cave, Cedar Park, Leander, Round Rock, Lake Travis, Downtown Austin, and South Central Austin. We come to your property for a free on-site estimate. Call (512) 296-2671 to schedule.
Most residential automatic gate installations are completed in 1 to 2 days on site. Custom fabrication adds lead time before installation day, which we confirm in your proposal after the site survey.
A single automatic gate up to 12 ft starts around $10,000 installed, or around $20,000 turnkey with an opener and a video call box, and a basic opener with remotes on a gate you already have is about $5,000. Cost depends on the gate type, materials, operator, and access control you choose. We give every customer a free on-site estimate with a detailed, itemized proposal before any work starts, so you see the full price up front. Retrofitting automation onto an existing manual gate is typically 30-50% less than a full new installation.
Yes. Austin Estate Gate is an Austin-based company that has been installing and servicing automatic gates since 2008, with 17+ years of experience across the greater Austin area and Texas Hill Country. Our team handles every install in person.
New installations include a 1-year labor warranty and a 2-year manufacturer warranty on the operator. We honor warranties promptly and typically respond to service needs within 24 hours.
Retail kits exist. We work the other way around: we build the gate for your opening, then size the operator to that gate's weight, length, and how many times a day it runs (Question 06), so the two are matched from the start.
Settle it with your survey and any easement or HOA paperwork before the posts are set, because moving a post set in concrete means starting that post over. Rules vary by city and HOA. On the site visit we walk the driveway layout and terrain with you, and the gate goes where your paperwork allows.
One leaf is simpler: one operator, one set of hinges or one track, fewer parts to adjust. Two leaves split the weight and shorten the swing, which helps on a wide opening or a tight driveway. We size it on the site visit, before anything is fabricated.
US Automatic, yes: it is one of the operator brands we install and service, along with LiftMaster, DoorKing (DKS), Viking Access, Ramset, Apollo/FAAC, Nice/HySecurity, and Linear. If your opener is not on that list, we can still service it, and a photo of the operator box or the sticker on its side usually tells us what you have before the visit. For a new install we recommend the operator by your gate's weight, length, and how many times a day it runs, not by brand.
More questions? Our gate repair and installation FAQs cover the rest.
Free on-site estimates across Austin and the Texas Hill Country.
"Professional, knowledgeable, and very nice. I would definitely recommend them if your gate breaks. Ive been very pleased with their work."
"Highest possible marks for everyone at Austin Estate Gate. Tony and team are one of the most responsive group of folks I've ever met. They will always have my gate business."
"These guys were great. We were looking at different options… They took a look at both options and provided suggestions and pricing for each. When we decided to motorize the bottom gate, we also deciding to include a package drop box to be installed inside the gate against the fence. They handled all of it, including coming back when we couldn't put together the drop box the first time. They were efficient, courteous, and very knowledgeable. I would use them again in a heartbeat!"
"AEG is the best for many reasons. Anthony and his crew have always went above and beyond. Prompt exceptional service with massive attention to detail….Thank You AEG:)!"
"I had a really great experience with estate gates. They helped me out on a Sunday when my gate would not open — they even let me keep the key. Then they came back and fixed the gate and have always been super accommodating and professional, along with reasonably priced."
"Charles and Mars did excellent work here at Another Closet in Fredericksburg TX. Above and beyond — got my gate working better than before it was broken. Recommend these two 10 out of 10."
Protect your property and increase its value by contacting Austin Estate Gate today to learn more about custom gate installation, access controls, and same-day service across Austin and the Hill Country.